LED module round 7W, ⌀50mm, 220-240V AC

Round LED module for direct power supply from 220–240V AC. It is intended for repair and production of luminaires where a compact light unit with a printed circuit board and a wide beam angle is required. The module is available in color temperature variants for warm and cool white.

Technical specifications

• Power consumption: 7 W
• Power supply: 220-240V AC
• LED type: SMD 2835
• Number of LEDs: 12
• Module outer diameter: 50 mm
• Beam angle: 120–130°
• Luminous flux: 530–600 lm
• Lifespan: 10,000 hours
• Light color options: warm white (3000–3500 K), cool white (6000–6500 K)

Functions and features

• Compact circular design suitable for integration into luminaires with limited space
• Direct power supply from 220–240 V AC mains without external DC source
• Wide beam angle suitable for area lighting
• SMD 2835 LED assembly for general lighting applications

Ideal for

• Repairs and overhaul of network LED luminaires
• Production of simple luminaires with direct power supply from the mains
• Ceiling and wall lights with a circular light module
• Technical and utility lighting in the interior

Package contents

• 1× LED module round Ø50 mm
• Wires and terminal blocks are not included in the package.

Why choose this product?

• Clearly defined parameters for light module design and replacement
• Possibility to select color temperature according to application requirements
• Standard LED type (SMD 2835) and compact size Ø50 mm
• Suitable solution for service use and piece production of luminaires

Installation and operating instructions

• The module does not contain wires or a terminal block; the lead wires must be soldered directly to the LED module's printed circuit board.
• Before soldering, verify the polarity/marking of the connection points on the board and use wires with appropriate insulation for the mains voltage.
• Install the module on a suitable substrate with regard to heat dissipation; when designing the luminaire, ensure sufficient thermal insulation and ventilation according to the structure.
• After installation, check the mechanical fastening, electrical insulation and strain relief of the supply wires.
• Operate only in an enclosed luminaire or in a structure that prevents accidental contact with live parts.

Safety notice

• The module is designed for 220–240 V AC power supply; this is a dangerous mains voltage with a risk of electric shock, burns or fire.
• Perform installation and service only with the power disconnected and after verifying that there is no voltage present on the wires.
• We recommend that the installation and connection be entrusted to a person with appropriate electrical qualifications and knowledge of working with mains voltage.
• Do not operate the module outside the luminaire without protection against contact; live parts may be present on the board.
• Use proper tools and procedures when soldering; improper soldering can lead to overheating of the connections, short circuits, or loose wires.
• Ensure sufficient insulation distances, mechanical relief of the leads and protection against vibrations; a loose wire can cause a short circuit or injury.
• Do not install the module in an environment with water or high humidity unless the entire luminaire structure is designed for the given conditions.
• Do not cover the module with thermal insulation materials or restrict heat dissipation; excessive temperature shortens the service life and increases the risk of failure.
• If the board, LED or supply connections are damaged, do not use the module any further and remove it from service.