Mains input filter with IEC C14 and CW2C switch, double fuse, red switch, 250VAC

Panel-mounted mains input module combining IEC C14 inlet, EMI filter and illuminated rocker switch. The CW2C-10A-T(F2) variant is intended for the power input of devices where interference suppression on the mains and integrated protection using a double fuse (F2) is required. The installation is designed for a mounting hole in the panel.

Technical specifications

• Model: CW2C
• Type: IEC Socket Type Power Filter (mains input EMI filter with IEC socket)
• Rated voltage: 115/250VAC
• Rated current: 3A, 6A, 10A (depending on variant)
• Switching: red with backlight
• Operating frequency: 50/60Hz
• Protection: double fuse protection (F2)
• Input type: IEC C14
• Connection: single-phase
• Leakage current: < 0.5 mA
• Operating temperature: -25 to +85 °C
• Climate category: 25/085/21
• Material/design: housing with nickel-plated surface
• Dimensions (according to documents): 66 × 52 × 58 mm
• Certification (according to documents): CE, RoHS
• Mounting: mounting into the mounting hole in the panel

Functions and features

• Integrated EMI filter to reduce high-frequency interference at the device's power input
• IEC C14 input connector and rocker switch in one module
• Double fuse protection (F2) for power supply branch protection according to device design
• Suitable for standard mains applications 115/250VAC at 50/60Hz
• Panel mount for quick installation into equipment cabinet

Ideal for

• Power input for industrial and laboratory equipment
• Power input for measuring devices and control units
• Equipment requiring a combination of IEC power cord, switch, and mains EMI filter
• Service and production use in the design and assembly of power panels

Package contents

• 1× panel IEC input filter CW2C with on/off switch

Why choose this product?

• Compact integration of multiple functions (IEC C14 + switch + EMI filter + fuse protection) into one panel element
• Parameters suitable for common mains power supply 115/250VAC and current load up to 10A
• Panel mounting simplifies the design of the device's power input
• Listed certifications (CE, RoHS) according to available documents

Installation and operating instructions

• Install into the corresponding mounting hole in the panel and ensure mechanical stability according to the cabinet design.
• Observe the correct connection of the LINE (L), NEUTRAL (N) and PE conductors according to the marking on the module and according to the diagram of your device.
• Connect the output side (LOAD) to the powered circuit of the device; connect the input side to the mains supply.
• Select and install fuses according to the application requirements and design limits of the device.

Safety notice

• The product is designed to operate with a mains voltage of up to 250VAC. Improper installation may result in electric shock or damage to the device.
• Installation and connection must be carried out by a qualified person in accordance with applicable standards and regulations.
• Before any intervention, disconnect the device from the power supply and verify that there is no voltage.
• Ensure reliable connection of the PE protective conductor.