LED module round 3W, ⌀34mm, 220-240V AC, multiple colors

The round LED module for mains power supply 220–240 V AC is designed for compact luminaires and lighting applications where simple integration onto a printed circuit board is required. The module is available in multiple light colour variants (green, red, blue).

Technical specifications

• Product code: AM1911
• Rated power consumption: 3 W
• Power supply: 220-240V AC
• LED type: 2835 SMD
• Number of LEDs: 10
• Outer diameter: 34 mm
• Beam angle: 120–130°
• Luminous intensity: 270–300 lm
• Light color options: green, red, blue

Functions and features

• Compact circular design suitable for integration into small luminaires
• Wide beam angle for even illumination within the luminaire
• SMD LED 2835 mounting for standard PCB mounting
• Power supply directly from the 220–240 V AC network (depending on module design)

Ideal for

• Indicator and signal lights (according to the selected light color)
• Recessed and decorative lighting with limited space
• Service replacement of LED modules in luminaires compatible in size and power supply
• Prototypes and custom designs of mains-powered luminaires

Package contents

• 1x LED module round Ø34 mm
• Wires and terminal blocks are not included in the package.

Why choose this product?

• Defined basic parameters for design and integration (voltage, power, size, angle, luminosity)
• Multiple color options for different application requirements
• Easy mechanical integration thanks to circular format

Installation and operating instructions

• The module does not contain wires or a terminal block; the lead wires must be soldered directly to the LED module's printed circuit board.
• Before soldering, verify the polarity/marking of the connection points on the module and use wires with adequate insulation temperature resistance.
• During assembly, ensure that the module is firmly attached so that there is no mechanical stress on the soldered joints.
• After installation, check the electrical strength and insulation distances within the entire luminaire according to the requirements for the mains voltage.
• For proper function, it is necessary to ensure adequate heat dissipation within the luminaire design.

Safety notice

• The module is designed for 220–240 V AC power supply. This is a dangerous mains voltage that can cause electric shock, burns or fire.
• Only perform installation, connection and service when the power supply is disconnected and after verifying the absence of voltage.
• We recommend that installation and connection be entrusted to a qualified person with knowledge of working on low voltage equipment in accordance with applicable regulations.
• The LED module must be operated in an electrically safe enclosure/luminaire that provides protection against touching live parts.
• Do not operate a module with a damaged circuit board, loose components, or visible signs of overheating.
• When soldering, take care to avoid bridging conductive paths, cold junctions or mechanical damage to the pads; check the quality of the connections after soldering.
• Ensure sufficient insulation distances, mechanical relief of the supply wires and protection against wires being pulled out of the soldered points.
• Do not place the module in an environment with a risk of contact with water or condensation unless adequate protection is provided within the luminaire.
• After completing the installation, check the function and safety of the entire device; if there are any unusual symptoms (odor, smoke, excessive heating), immediately disconnect the device from the mains.