LED module round 9W, ⌀60mm, 220-240V AC

The round LED module for direct AC power supply is designed for repair and production of luminaires where a compact circular printed circuit board and a wide beam angle are required. The module is available in warm white or cool white light color options.

Technical specifications

• LED type: 2835 SMD
• Number of LEDs: 24
• Rated power consumption: 9 W
• Power supply: 170-275 V AC (direct mains power supply)
• Outer diameter: 60 mm
• Beam angle: 120–130°
• Luminous intensity: 720–810 lm
• Light color (variants): warm white (3000–3500 K), cool white (6000–6500 K)

Functions and features

• Circular design for installation in compact luminaires and light sources
• Wide beam angle suitable for area lighting
• Power supply directly from AC without external low-voltage source (depending on module design)
• SMD LED installation for even light distribution across the module surface

Ideal for

• Repairs and overhaul of luminaires with a circular LED module Ø60 mm
• DIY and prototype designs of networked LED luminaires
• Ceiling and wall lights with diffuser and sufficient space for insulation and cooling

Package contents

• 1x LED module round Ø60 mm
• Wires and terminal blocks are not included in the package.

Why choose this product?

• Clearly defined electrical and optical parameters for luminaire design and service
• Compact size of Ø60 mm while maintaining a wide beam angle
• Possibility to select color temperature according to application

Installation and operating instructions

• Important: The module does not contain wires or a terminal block; the lead wires must be soldered directly to the LED module's printed circuit board.
• Before soldering, disconnect the power supply and verify that there is no voltage.
• Use wires with appropriate insulation for the mains voltage and provide strain relief to prevent mechanical stress from being transferred to the soldered joints.
• After installation, ensure that no conductive part of the module can touch the metal parts of the luminaire without adequate insulation.
• Install the module in the luminaire in such a way that sufficient cooling is ensured and the operating conditions given by the luminaire design are not exceeded.

Safety notice

• Warning: The module is powered by a mains voltage of 170–275 V AC. Improper handling may result in electric shock, fire or damage to the device.
• Perform installation and service only with the power supply disconnected; after disconnection, wait for any components in the circuit to discharge and always verify the voltage-free state by measurement.
• Do not operate the module outside of an enclosed luminaire or without providing a cover that prevents contact with live parts.
• Ensure sufficient insulation distances and mechanical fastening; do not allow contact with conductive parts, screws or edges that may damage the insulation of the wires.
• Use only wires and soldering material suitable for network applications; after soldering, check the quality of the connections and the absence of short circuits.
• Do not operate the module in environments with high humidity or where condensation may occur unless the luminaire design provides adequate protection.
• If the board, LEDs, soldering pads or wire insulation are damaged, do not use the module any longer.