Start-up capacitor CD60, 450V, 200uF

The CD60 type starting electrolytic capacitor is designed for short-term operation in starting circuits of single-phase asynchronous motors. It is used to increase starting torque and reliable motor start-up in applications with alternating voltage supply.

Technical specifications

• Type: starting electrolytic capacitor (CD60)
• Capacitance: 200 µF
• Rated voltage: 450 VAC
• Frequency: 50/60Hz
• Capacity tolerance: ±5%
• Body dimensions: 100 × 50 mm
• Design: plastic casing
• Connection: wires

Functions and features

• Designed for motor starting circuits where higher starting capacity is required
• Electrolytic design optimized for short-term starting loads
• Cylindrical housing with plastic cover for basic mechanical protection
• Wire outlets for direct connection to terminal blocks and cabling

Ideal for

• Starting circuits of single-phase asynchronous motors
• Compressors, pumps, fans and other motor applications with starting capacitor
• Service replacement of starting capacitors in motor units

Package contents

• 1× start capacitor CD60 200 µF / 450 VAC

Why choose this product?

• Clearly defined basic parameters for starting applications: 200 µF and 450 VAC
• 100 x 50 mm dimensions for compatibility with common brackets and mounting spaces
• Suitable for standard 50/60 Hz mains applications

Installation and operating instructions

• Before installation, verify the required capacity and voltage class according to the motor and wiring.
• Use the starting capacitor only in the starting mode according to the device design (typically with a centrifugal switch or relay), not for continuous operation.
• Ensure mechanical fastening with regard to vibrations and stress on the terminals.

Safety notice

• Working with AC voltages of 230 V and higher can be dangerous. Installation should only be carried out with the power supply disconnected and by a suitably qualified person.
• Always safely discharge the capacitor before handling it, it may remain charged even after the power is disconnected.
• Do not exceed the rated voltage of 450 VAC and do not use the capacitor outside the designated motor starting mode.