Voltage converter from 12/24 V DC to 5V DC, 20A, 100W, IP68

The DC-DC voltage converter is used to convert a direct current input voltage of 12/24 V DC to a stabilized output voltage of 5 V DC. It is designed for powering devices requiring low direct current voltage and higher output current, for example in automotive, service, industrial, or installation applications.

Technical specifications

• Product type: DC-DC voltage converter
• Input voltage: 12/24 V DC (10-30V DC)
• Output voltage: 5 V DC
• Output current: 20 A
• Output power: 100 W
• Protection rating: IP68
• Dimensions: 74 x 74 x 32 mm
• Weight: 250 g
• Certification: CE, RoHS

Functions and features

• Conversion of direct current voltage from 12/24 V DC to an output of 5 V DC.
• Designed for use in electrical and electronic devices with direct current power supply.
• Construction in a closed casing with wires for connecting the input and output.
• The IP68 protection rating allows use in environments with increased demands for protection against dust and water.
• The output power of 100 W is given by the output voltage of 5 V DC and the output current of 20 A.

Ideal for

• Powering 5V DC devices from a 12/24 V DC direct current power supply system.
• Automotive and onboard electrical installations with direct current voltage.
• Service and development applications where conversion to a stabilized voltage of 5 V DC is needed.
• Electronic projects with a requirement for higher output current at a voltage of 5 V DC.

Package contents

• 1x DC-DC voltage converter 12/24 V DC to 5 V DC, 20 A

Why choose this product

• The input voltage of 12/24 V DC corresponds to common direct current power supply systems.
• The output of 5 V DC and 20 A allows powering devices with a requirement for higher current draw.
• The closed design with IP68 protection rating is suitable for installations with higher demands on casing durability.
• The output power of 100 W is based on the verifiable calculation of 5 V x 20 A.

Installation and operation instructions

• Before connecting, verify that the input voltage corresponds to the value of 12/24 V DC.
• The connected load must not exceed the output values of 5 V DC and 20 A.
• Observe the correct polarity of both the input and output connections.
• For a current of 20 A, use wires and terminals corresponding to the current load.
• Install the converter in such a way as to prevent short circuits, mechanical damage, or contact with conductive objects.
• The installation may only be performed by a person with knowledge of working with direct current power circuits.

Safety warnings

• Incorrect connection leads to damage to the converter, the connected load, or the power supply.
• In case of overload, short circuit, or insufficient cooling, there is a risk of overheating.
• Do not connect the converter outside the specified input voltage of 12/24 V DC.
• Before handling, disconnect the power supply and verify the absence of voltage on the wires.
• The product is not intended for direct connection to mains voltage.