Temperature Probe E, 0-400°C, M6 Thread

The Type E temperature probe is designed to measure temperatures from 0 to 400 °C when used with a compatible temperature controller or measuring instrument. Constructed with a stainless steel probe, external metal braiding and two fork terminals, it is suitable for fixed connections in industrial and technical applications. The product is available in 1 m and 2 m cable length variants.

Technical specifications

• Thermocouple type: E
• Measuring range: 0 to 400 °C
• Probe material: stainless steel
• Inner insulation: glass fiber
• Outer shielding: metal braiding
• Connection: 2 fork terminals
• Fork terminal pitch: 3.5 mm
• Sensor tip diameter: 6 mm
• Thread: M6 × 1

Functions and features

• The probe is intended for temperature sensing using an E-type thermocouple.
• Stainless steel construction of the sensing part supports use in technical and industrial conditions.
• Glass insulation and metal braiding protect the lead during operation in environments with elevated thermal stress.
• The pair of fork terminals enables connection to corresponding terminals of a controller or measuring device.
• 1 m and 2 m length variants allow selection according to installation distance.

Ideal for

• Connection to temperature controllers
• Industrial temperature measurement
• Temperature measurement on machines, equipment and process units
• Replacement probe for compatible measuring and control applications

Package contents

• 1x Type E temperature probe

Why choose this product

• Clearly specified E-type thermocouple and 0 to 400 °C range
• Construction with stainless probe, glass insulation and metal braiding
• Secure connection via two fork terminals
• Choice of two cable lengths for different installation conditions

Installation and operation instructions

• Before connection, verify probe compatibility with the measuring or control device for E-type thermocouples.
• During installation observe correct polarity and ensure mechanically secure connection of both conductors.
• Install the sensing part so it is exposed to the measured medium within the range intended for this probe.
• Do not route the cable through areas with risk of mechanical damage or excessive bending.

Safety warnings

• Perform installation only with the equipment disconnected from power.
• Use the product only with a compatible measuring or control device.
• Incorrect wiring may lead to erroneous measurements or damage to connected equipment.
• When used at high temperatures there is a risk of burns from the probe surface and adjacent parts.
• If the probe is part of industrial equipment, installation should be carried out by a person knowledgeable about the relevant wiring and operating conditions.