Temperature probe PT100, -50 to 200 °C, roller 4x30mm, 3 wires

The PT100 resistance temperature sensor is designed for temperature measurement in technological, laboratory and control applications. The design with a probe in a metal housing, 3-wire lead and fork connectors allows connection to regulators, measuring instruments and control systems. The product is available in cable lengths of 0.5 m, 1 m, 2 m, 3 m, 4 m, 5 m, 6 m, 7 m, 8 m, 9 m and 10 m.

Technical specifications

• Sensor type: PT100
• Sensor type: resistance temperature sensor
• Connection type: 3-wire
• Cable insulation material: PTFE
• Cable shielding: metal shielding
• Outer protective braid: transparent PTFE
• Probe size: diameter 4 mm, length 30 mm
• Probe material: 304 stainless steel
• Wire terminations: spade connectors
• Available cable lengths: 0.5 m, 1 m, 2 m, 3 m, 4 m, 5 m, 6 m, 7 m, 8 m, 9 m, 10 m
• Stated temperature range in the documents: -50 to 200 °C

Functions and features

• Resistance temperature measurement using a PT100 sensor
• 3-wire connection for connection to measuring and control inputs designed for PT100
• Metal probe in a tubular design for insertion into the measured location
• PTFE insulation and braided cable design for mechanical and thermal resistance of the supply
• Shielded cable to reduce the influence of electromagnetic interference
• Fork connectors for direct mounting into screw terminals

Ideal for

• Connection to temperature controllers and panel meters with PT100 input
• Temperature measurement in industrial and workshop facilities
• Laboratory and test applications
• Installation in heating, cooling and control systems

Package contents

• 1x PT100 temperature sensor with cable (length according to selected variant)

Why choose this product?

• Clearly defined PT100 design with 3-wire connection
• Compact 4 x 30 mm probe for installation in confined spaces
• Shielded PTFE cable suitable for technical measurement applications
• Multiple cable lengths to suit specific installations
• Forked termination makes it easy to connect to terminal blocks

Installation and operating instructions

• Before connecting, verify the compatibility of the device input with the PT100 sensor and 3-wire connection.
• During installation, ensure that the individual wires are connected correctly according to the diagram of the controller or measuring device used.
• Do not bend the cable with a small radius at the probe exit point.
• Install the sensor so that the measuring part of the probe is in sufficient contact with the measured environment.

Safety notice

• Only perform installation and connection when the device is disconnected from power.
• Incorrect wiring can lead to measurement errors or damage to the downstream electronics.
• If the sensor is connected to an industrial controller or mains-powered device, the installation must be carried out by a qualified person.
• The product is not intended for use outside the range and conditions specified by the measuring or control device used.