LED Strip 2835 120LED/m, 18W/m, 24V, CRI80

Universal LED strip with a density of 120 LEDs/m provides balanced brightness and a very uniform light for both decorative and functional lighting. 24 V power supply, high‑quality 8 mm PCB with 2 oz copper and original 3M 9495LE adhesive layer ensure stable performance, reliable installation and long service life. Supplier‑verified 5‑year warranty.

Technical specifications

• Chip type: SMD 2835
• LED density: 120 LED/m
• Power supply: DC 24 V
• Power consumption: 18 W/m
• Luminous flux: 1650–1750 lm/m
• CRI: Ra > 80
• Cutting interval: every 50 mm (6 LEDs)
• PCB width: 8 mm, 2 oz copper
• Ingress protection: IP20 (indoor)
• Operating temperature: −25 °C to +65 °C
• Adhesive layer: 3M 9495LE
• Lifespan: up to 50,000 h

Features and characteristics

• High LED density supports a more uniform light line.
• 24 V DC supply helps reduce voltage drop over longer runs compared to lower voltage.
• The strip is suitable for dimming via PWM when used with a compatible 24 V system.
• The back side is equipped with a self‑adhesive layer for mounting on a suitable surface.
• Cutting every 50 mm makes it easy to adapt the installation length.
• IP20 design is intended for dry indoor areas.

Ideal for

• Under‑cabinet lighting in kitchens, shelves and furniture.
• Linear lighting in aluminium profiles.
• Display cases, shelves and shop windows.
• Accent and supplementary interior lighting.
• Commercial and decorative lighting installations in dry environments.

Package contents

• 1 m LED strip SMD 2835, 120 LEDs

Why choose this product

• Combines 24 V DC supply, density of 120 LED/m and power consumption of 18 W/m for linear lighting applications.
• Enables precise shortening in 50 mm increments.
• 8 mm width facilitates use in narrower profiles and installation spaces.
• PCB with 2 oz copper supports stable electrical and thermal performance.
• Integrated adhesive layer simplifies mounting on a prepared surface.

Installation and operating instructions

• Use a 24 V DC power supply with an appropriate power reserve.
• Carry out installation on a clean, dry and thermally suitable surface.
• For longer service life and better heat dissipation, installation in an aluminium profile is recommended.
• Cut the strip only at the marked cutting points.
• The product is intended for indoor use in dry environments.

Safety warnings

• Incorrect wiring may cause damage to the strip or the power supply.
• The product is not intended for direct connection to 230 V mains voltage.
• Perform installation only with the power disconnected.
• Due to the strip’s power consumption, sufficient heat dissipation must be ensured by installing it in an aluminium profile.
• For the installation of longer runs or in case of any uncertainties regarding wiring, professional installation is recommended.