Power supply 0-220V DC, 6.5A - 1500W, 1 channel, AMPUL.eu
zoom_out_map
chevron_left chevron_right

Power supply 0-220V DC, 6.5A - 1500W, 1 channel

354.54 €

354.54 € Tax excluded

Including 0.34 € for ecotax

354.54 € without VAT
new_releases On order
datasheet

Switched industrial power supply intended for installation or in distribution cabinets. This source is of industrial design, it is covered by a metal frame with IP20 protection, it has a standard terminal block with screws for connecting the input mains voltage including the ground wire and one DC voltage output. The source has short circuit protection, overvoltage protection and current overload protection. The industrial source is actively cooled. The power source includes an LED diode that serves as a power indicator and also an adjustment trimmer, thanks to which the output voltage of the power source can be adjusted.

Suitable, for example, for powering servo motors, home automation, entrance gates and other applications. Always count on a sufficient reserve in performance (20-25%), it is not advisable to operate the source for a long time at the limit of performance possibilities. You can find more industrial sources of other parameters in our offer.

Input voltage: 190-240 V AC, 47-63 Hz.
Output voltage: 0-220 V DC, max. 6.5A
Efficiency: 86.5%
Protection against overload (105%-150%), overvoltage, short circuit (automatic recovery)
Protection against overheating: ≥70°C (reset when falling below 50°C)
Tested for 2G vibration (10-500Hz/10min)
Insulation resistance: I/PO/P, I/P-FG, O/P-FG:100M Ohms/500VDC
Steel construction
Working temperature: 0~50°C
Ambient humidity: 0~95%
For indoor use only (IP20 protection)
Size: 291x132x68mm

OEM
AM3809
Input voltage
190V-240V AC, 47-63 Hz
Output voltage
0-220 V DC
Output current
6.5 A
Output power
1500 W
Waterproof grade
IP20

Introduction

This manual provides general guidelines for the installation and maintenance of switched-mode power supplies. It is important to follow all safety instructions and, if necessary, consult specific instructions with the seller.

1. Safety Guidelines

  • Professional Installation – The installation and maintenance of the power supply should be performed by qualified personnel with appropriate knowledge and experience in the field of electrical engineering.
  • Disconnect from the Network – Before starting any work on the power supply, always disconnect the device from the electrical network and ensure that it cannot be inadvertently connected.
  • Protective Equipment – When handling the power supply, use appropriate personal protective equipment, such as insulating gloves and safety glasses.
  • Grounding – Ensure that the power supply is properly grounded to guarantee the safety and proper functioning of the device.

2. Installation of the Power Supply

  • Placement – Install the power supply in a dry, well-ventilated area protected from direct sunlight, humidity, and extreme temperatures.
  • Mounting – Secure the power supply to a solid surface using suitable mounting hardware to ensure stability and minimize vibrations.
  • Cooling Space – Ensure there is sufficient space around the power supply for heat dissipation and proper ventilation to prevent overheating of the device.

3. Electrical Connection

  • Input Connection – Connect the power supply to the electrical network according to the following designations:
    • L (Live): Phase conductor (usually brown or black)
    • N (Neutral): Neutral conductor (usually blue)
    • Ground (Grounding symbol): Protective conductor (usually green-yellow)
  • Output Connection – The power supply may have one or more output terminals labeled as V+ and V-. If multiple output terminals are available and full power is required, these outputs must be connected in parallel to ensure an even current distribution.

4. Maintenance of the Power Supply

  • Regular Inspections – Perform regular visual inspections of the power supply to detect any signs of damage, such as overheating, corrosion, or loose connections.
  • Cleaning – Keep the power supply clean and free of dust. Always disconnect the device from the network before cleaning. Use a dry or slightly damp cloth for cleaning. Do not use aggressive cleaning agents.
  • Ventilation Check – Ensure that the ventilation openings are not blocked and that any fans (if present) are functioning properly.
  • Functionality Testing – Regularly test the output voltage and current to ensure the proper functioning of the power supply.

5. Warnings

  • Risk of Electric Shock – Power supplies operate with high voltage, which can cause serious injury or death. Always adhere to safety instructions and procedures.
  • Repairs – Any repairs should only be performed by qualified personnel. Do not attempt repairs without the necessary qualifications.
  • Replacement of Components – When replacing components, only use original spare parts recommended by the manufacturer.

By following the above guidelines, you ensure the safe and reliable operation of the switched-mode power supply.

EU Importer: AMPUL SYSTEM s.r.o., Čsl. armády 641/40, 78701 Šumperk, Czech Republic,

6 other products in the same category: