LED ring diameter 80mm

LED rings are intended for decorative lighting applications and modifications of vehicle headlights. The rings work with a 12 V DC power supply, they have mounted SMD LED chips. 

Technical specifications

• Product type: LED light rings
• Outer diameter: 80 mm
• Inner diameter: 64 mm
• Power supply voltage: 12 V DC
• Power input: 1.5 W
• Number of LEDs: 24 SMD LEDs per ring
• LED chip type: 1210 / 3528 SMD
• Material: UV polycarbonate and LED
• Wire length: 20 cm
• Connection: two-wire design with red and black wire

Functions and features

• Circular light design for creating the Angel Eyes effect.
• Mounting with 24 SMD LED diodes ensures an even distribution of light points around the perimeter of the ring.
• The 12 V DC power supply corresponds to use in low-voltage direct current installations.
• The polycarbonate design serves as the mechanical base of the light ring.
• Separate supply wires allow connection to a prepared electrical circuit.

Ideal for

• Decorative light modifications of automotive headlights.
• Low-voltage lighting applications with a 12 V DC power supply.
• Projects where a circular LED light element with a diameter of 80 mm is required.
• Replacement or addition of an existing LED ring with identical dimensional and electrical parameters.

Package contents

• 1x LED ring 80 mm according to color variant

Why choose this product

• Known basic electrical parameters: 12 V DC and power input 1.5 W.
• Clearly stated outer and inner diameter for checking the suitability of installation.
• The set contains two identical rings for paired use.
• Available color variants white and red allow selection according to the specific application.

Installation and operation instructions

• Before installation, verify the dimensional conformity with the installation site.
• Perform the connection only to a 12 V DC direct current circuit.
• When connecting, observe the polarity of the wires.
• Install the rings so that there is no mechanical stress on the printed circuit board, LED diodes, or supply wires.
• Entrust the installation into the vehicle headlight to a person with knowledge of vehicle electrical installations.
• Before use in the exterior lighting of a vehicle, verify compliance with valid requirements for operation on public roads.

Safety warnings

• The product is an electrical component intended for low-voltage direct current connection; incorrect connection can cause damage to the LED ring.
• Do not connect to a voltage higher than 12 V DC.
• Prevent a short circuit between the supply wires.
• Do not perform installation with the power supply connected.
• When installing in a headlight, ensure that the ring is not exposed to direct contact with hot parts and that the wires are not pinched.